泉州聯進機械有限公司

QUANZHOU LIANJIN MACHINE CO., LTD

切

膠

機

使

用

說

明

Rubber Cutter Cutting/Bale Cutter Usage

用途：切丁苯標膠順丁等膠料。

特點：1.切完之后，自動上升，操作省時人性化。

      2.刀片材質特別設計，切料利索。

使用說明：

公共設備電力：電壓380V,50Hz。

主電源線：2.5平方毫米  四芯線

1. 加68#  液壓油顯示油表至80%。液壓油一定要保持干凈，油箱不能有雜物進入，以免影響油泵，電池閥損壞。

2.  切料時手不要接近刀口。

3. 液壓油要按時更換（一般一年更換一次）。

4. 油泵壓力不要隨意調整，一般60kg可以正常工作。

5. 自動檔按住啟動開關2秒切刀自動下降自動上升。手動檔需長按啟動開關切刀下降，松開自動上升。

Purpose：Cutting the butylbenzene rubber or buitadiene rubber.

Specialty: 1. After cutting, up automatic, save time& hommization.

2. The blade’s material design specialty, cutting agile.

INSTRUCTIONS:

Public equipment

Public equipment：Power: 380V,50Hz.

Host power line:  2.5mm2 four-core

1. Add the 68# hydraulic oil until oil gauge reach to 80%.The hydraulic oil should be kept clean and no sundries in oil tank or it will break the oil pump and the electromagnetic valve and affect its durance.

2. Watch out when a bale cutter is working. Keep hands off when the knife is cutting.

3. Hydraulic oil should be renewed regularly (normally once per annum).

4. Do not arbitrarily adjust the pressure of the pump, the normal value being 60kg.

5. Automatic stop and press start switch 2 SEC automatic drop automatically increases. The manual gear should be long pressed to start the concern knife drop, loosen the automatic rise.